Hearing Aid Wax Guards: What They Do and How to Change One

Close-up of a woman adjusting her behind-the-ear hearing aid

A wax guard is a small filter that keeps earwax and debris out of the speaker in your hearing aid. Change it when your hearing aid sounds weak or muffled, or when you can see wax covering it.

Why does a hearing aid need a wax guard?

Earwax blocks sound once it reaches the speaker. The guard sits in front of the speaker and catches wax before it gets in. When it clogs, you swap the guard and the speaker stays clean.

Signs a wax guard needs changing

Weak or muffled sound and wax you can see on the guard both mean it is time for a new one. If a hearing aid goes quiet with a fresh battery or a full charge, check the guard.

How often you change it depends on how much wax your ears make, so look at the guard each time you clean your hearing aid.

How to change a wax guard

Most guards use a two-ended tool. One end pulls the old guard out, and the other presses the new one in. Phonak’s CeruShield Disk is the exception: you click the speaker into a rotating disk instead. These steps cover the two-ended tool on receiver-in-canal hearing aids, which have a small speaker in the ear connected by a thin wire. Check your hearing aid’s guide or ask us which one you have.

You need:

  • Replacement guards made for your hearing aid
  • The tool that comes in the pack
  • A small cleaning brush
  • Good light

The steps:

  • Sit over a table so a dropped part does not roll away.
  • Remove the dome (the soft ear tip) from the receiver tip.
  • Push the removal end of the tool straight into the old guard and pull it straight out. Do not twist it.
  • Wipe the speaker with a lint-free cloth.
  • Push the new guard in with the other end of the tool until it sits flush with the speaker opening. Pull the tool straight out.
  • Put the dome back on, turn the hearing aid on, and listen for sound.

What if the sound does not come back?

If sound stays weak after a new guard, something else is wrong. Bring the hearing aid to Rose Audiology and we will check it.

Wax in the dome or tube, a weak battery, a damaged receiver, and wax packed in your own ear canal all cut sound. We clean and repair hearing aids, and we offer ear wax removal when the blockage is in the ear itself.

Which wax guard fits your hearing aid?

The one made for your hearing aid’s receiver. Some brands share a guard and many do not, so match the guard to your model.

Phonak’s receiver-in-canal hearing aids take either CeruStop or CeruShield, depending on the receiver. Oticon uses ProWax miniFit on its miniFit receivers. Custom earmolds use a separate filter in the sound outlet.

We fit hearing aids from Phonak, Oticon, ReSound, Widex, Starkey, Unitron, and Signia.

Keeping wax out of your hearing aid

Wipe and brush your hearing aid each time you take it out, and keep it away from moisture.

If your ears make a lot of wax, ask us about ear wax removal. Our hearing aid accessories include cleaning tools.

Where to get wax guards in Chantilly, VA

Call Rose Audiology at 703-291-9053 to ask about wax guards for your hearing aid.

Our office is at 14102 Sullyfield Cir Suite 2700, Chantilly, VA 20151. Hours are Monday through Thursday, 8:30 AM to 5:30 PM.

Book an appointment or call 703-291-9053.

Audiologist conducting hearing test with patient seated in sound booth viewing audiogram on monitor
Are you ready to hear and be heard?
Hearing clearly impacts your quality of life now and for years to come in so many ways. Call us today and take the first step toward clearer, more confident listening.
Or give us a call at:
Recent News & Articles